Reply

Working on trains...would you?

October 18th, 2011, 7:58 am

theflyingdutchman
step one
step one
Posts: 33
Joined: February 6th, 2011, 4:17 pm
Location: United Kingdom
Just looking at some design aspects of working areas on trains and what people think of this and how this could possibly be improved? I feel some obvious one's are free wi-fi, power socket for each seat and big enough table for a laptop.

How do people feel about privacy and would they even bother working on a train if they were given proper facilities to work in?
Check out my web-site at - http://www.ash-id.co.uk/

Re: Working on trains...would you?

October 18th, 2011, 12:45 pm

seurban
step three
step three
Posts: 172
Joined: January 24th, 2009, 12:24 pm
I would be just as likely to work on a train as a plane, as long as the ride was smooth. A rough ride might inhibit sketching, but that's the same situation as flying. I don't know that the privacy concerns would be much different than a plane, either. I've never really been concerned about privacy too much on a plane, though. That said, I've never done much serious work on either (certainly nothing super confidential), just because I don't travel much, except for vacation (then I'm drawing or reading, but for pleasure).

Re: Working on trains...would you?

October 20th, 2011, 5:43 am

theflyingdutchman
step one
step one
Posts: 33
Joined: February 6th, 2011, 4:17 pm
Location: United Kingdom
Yeh that is true...I guess it's also a little bit harder for us designers to try and do any sort of sketching, idea creation on a bumpy ride.

I was just wondering if a dedicated coach for the business traveller would be of any use i.e. having a coach with pods that provide more space and privacy?
Check out my web-site at - http://www.ash-id.co.uk/

Re: Working on trains...would you?

October 20th, 2011, 9:58 am

User avatar
yo
Administration
Administration
Posts: 17074
Joined: January 5th, 2004, 6:57 pm
Coroflot: 67242
Location: SoCal
I used to take the Accela from Boston to NY once a month when I was at Converse. I always would work on my laptop, I had one of those AT&T 3G USB things. I would just do emails mainly, maybe redline some cad.

Re: Working on trains...would you?

October 20th, 2011, 1:10 pm

User avatar
tarngerine
full self-realization
full self-realization
Posts: 1000
Joined: July 8th, 2008, 8:15 pm
Location: NYC
I've only ever worked on the Caltrain. NY Subways are impossible. Caltrain has nice booths with tables. I did some sketching on my ipad, albeit sketchy. It was more idea sketching/note taking than presentation sketches.

Re: Working on trains...would you?

October 21st, 2011, 1:47 pm

User avatar
Lmo
Moderator
Moderator
Posts: 3965
Joined: January 20th, 2004, 5:29 pm
Location: Pismo Beach, CA
Working on trains ... I keep thinking; Raymond Lowey :wink:

Image
Lew Morris
"It's what you discover, after you know it all, that counts." _ John Wooden

New to the boards? Please read before you post ->Discussion Boards Posting Standards

Re: Working on trains...would you?

October 22nd, 2011, 8:53 am

User avatar
Travisimo
full self-realization
full self-realization
Posts: 1867
Joined: September 4th, 2005, 2:28 pm
Location: UK
I used to work/sketch on the Bay Area Caltrain and the First Great Western, Bristol to London. Both are pretty smooth, but still bumpy enough to notice - i'd say that's the biggest problem for a designer. Sometimes they can be a little crowed too, and you couldn't really spread out on a table or open up a 17in laptop in some seats. The UK lines usually have power plugs under each seat though, and tables every 5 seat rows or so, which is a big plus. It's a great time for emails, writing(typing), and reading

Re: Working on trains...would you?

October 22nd, 2011, 6:01 pm

theflyingdutchman
step one
step one
Posts: 33
Joined: February 6th, 2011, 4:17 pm
Location: United Kingdom
Ha ha yes I would say that some of RL designs were quite radical for that time period, a very fine example the picture above :-)

I think I will need to do some further research on American passenger trains vs UK trains.

Thanks for the other feedback as well!
Check out my web-site at - http://www.ash-id.co.uk/

Re: Working on trains...would you?

October 23rd, 2011, 2:36 pm

User avatar
Dan Lewis
step four
step four
Posts: 353
Joined: December 6th, 2005, 5:47 pm
Lmo wrote:Working on trains ... I keep thinking; Raymond Lowey :wink:

Image
When I worked for Loewy in 1971, I remember several of the then older designers telling me of the kits they had, drawing board, tools, etc., that they would take with them on train trips to the mid west and west coast so that they could work during travel time. No time wasted for designers at Lowey. I was working on the design of a new bus for the US Department of Transportation, being engineered and prototyped by AM General in Detroit. We would leave NY on a 7 AM flight to Detroit, work 24 hours in Detroit, fly back the next morning and work the afternoon in NY before going home. So many hours -- what fun that was.

Re: Working on trains...would you?

October 25th, 2011, 12:30 am

User avatar
Lmo
Moderator
Moderator
Posts: 3965
Joined: January 20th, 2004, 5:29 pm
Location: Pismo Beach, CA
When I worked for Loewy in 1971 ...
Crikey Dan! That makes you older than me! Old's Cool. :wink:
Lew Morris
"It's what you discover, after you know it all, that counts." _ John Wooden

New to the boards? Please read before you post ->Discussion Boards Posting Standards

Re: Working on trains...would you?

October 27th, 2011, 1:36 pm

theflyingdutchman
step one
step one
Posts: 33
Joined: February 6th, 2011, 4:17 pm
Location: United Kingdom
Would appreciate it if anyone has a couple of minutes, Iv'e also put together a quick survey relating to this issue with trains:

http://www.zoomerang.com/Survey/WEB22DL3KVNW4J

Thank you, danke schön, baie dankie,muchas gracias, xie xie(I think), shukran
Check out my web-site at - http://www.ash-id.co.uk/

Re: Working on trains...would you?

December 4th, 2011, 3:36 am

User avatar
rsuzuki
step two
step two
Posts: 87
Joined: February 11th, 2011, 6:25 pm
Location: Denver, CO
When I was commuting back and forth to Tokyo, there was literally no *room* to sketch. I got really good at sleeping while standing, and squished between ten people from all sides. :) If I paid the extra $4 for the Greencar, I could get a seat and the ride was super smooth, so I could sketch or use my laptop. The RTD in Denver usually is a bit too crowded and bumpy for sketching.
- Rei Suzuki
from Tokyo, living in Denver
Coroflot » http://www.coroflot.com/rei_suzuki
Reply