My idea comes from having a locking mechanism within the bike itself. This enables that no moving parts can be stolen. All you have to do is turn a key to activate everything. I didn’t have photoshop or AutoCad handy so my diagram is very basic.
When you turn the key,
- clamps lock on your brake lines
- As you continue to turn, the turning motion moves them away from their respected wheel, thus applying the ‘brakes’
- The turning motion also moves forth 2 rods, 1 towards the Seat, and the other towards the Handlebars and locks the Seat post to the Seat tube, and Stem to the Head tube respectively.
- Thus locking all movable parts with 1 swift turn of the key.
In addition, inside the cylindrical key lock is a coil that turns the bike into lock mode by default. This makes it easier to lock, but slightly harder to unlock. But releasing tension in the brake lines is a lot easier than trying to create tension in them, so all in all you use less energy.