Show your designs!

theha: Really diggin’ the angular asymmetrical feet forms you have going. How much weight can the foam take without deforming? Hold a TV and all the components fine?

Really diggin’ the angular asymmetrical feet forms you have going.

My thoughts as well, and very accurately cut … hot wire? Is there a hard “leg” embedded inside the foam to support it? Also actually like the unfinished edge of the plywood. Really fresh concept. Looks inviting too, have you done a test to see if it will bear the load of an unexpected “sit” .

but probably not suited to people with pets

Between dey Manx claws and dey furry Manx coats it would last about a week in our house… . of course there isn’t much upholstered furniture that does.

weight wise, yes it supports a tv easily but does require a piece of glass top for plasma/LCD. I made the unit for my own use and I have my TV wall mounted but I am currently working on a second protype.
I can sit on the unit, the foam compresses slightly but it wont damage anything.

All the foam was cut with CNC and a table lighting knife as this is a sponge foam not polystyrene, this gives very sharp finish.
I like the use of unfinised plywood although originally I wanted to only use foam but i found it a bit much on the eye.
Also there is no added structural support the plywood keeps it riggid and the foam is firm enough to take weight

My partner wants a dog so I am savering what I have for now

Thanks for looking
Peace out Max

Nice design. I think it would be interesting to explore in different materials, too. Black acrylic, rather than plywood, with the foam would look good, too. The shiny lines would add a nice contrast to the matte appearance of the foam. Still very nice.

Here are some stools that I make. Made of bent solid steel bar bases powder coated and Tasmania Oak tops finished in a satin coat.
Heavily influenced by the industrial stools I used to find at garage sales I just love the minimal material usage.


very nice, I love the chamfer on the bottom of the seat.

Thanks Yo.

A chair model I made for a class project junior year.

I designed this laptop table a couple of years ago, if only I could afford to make the mould!

http://www.designfreeze.co.uk

So lately I have been working on this piece for my home.
She is a monster of a sideboard 2700mm long.
It’s a design I have been sitting on for a while and only summed up the courage to make it fairly recently.
All hand made of Tasmanian Oak with American Walnut details. I’m really happy with the result!
I’ve just completed a smaller 1800mm version for someone as well.

Thanks again
Max


Thats a nice piece! Normally Im not a fan of oak, but that looks very nice. What is the finish on it? oil/wax? I really like the fit/finish of the foot as well. I imagine working with that large of a top sheet added some challenges. Did you consider miter-folds rather than butt joints?

@theha that is a beauty!

Thanks guys

The finish is a satin poly.
The sizing did make it difficult but it ment I had to get a hand when putting it together.
Mitre joints were considered but I’m not entirely sure why I chose butt joints I think because I made the top slightly thicker
Than the sides

Thanks again
Max

Max … drool … that’s gorgeous … drool … could you grace us with some more … drool … detail shots?

Loving the floor as well. Painted concrete? Cork?

Thanks Lmo

Here are a few more details.
Also my floor is epoxy on concrete. Like polished concrete with out the final cut back.

Thanks again. I’ve just finished a dining table I’ll put it up when I get some good shots



theha your dovetails are superb. Excellent work.

The finger pull is walnut? If so, splendid job on the thin wall cylinder.

Any particular reason the sides are not on top of the bottom? It seems the load transfer would not be ideal the way you have it. On the other hand, it makes the design more intriguing as shown by my question.

And for a mundane question, what did you use for runners on the door slides?

Thanks iab for the interest.
Finger pull is walnut lathed and drilled out. I really wanted to place them in from the rear of the sliding door so give a inlay appearance but decided on this way in the end.

The sides being the way they are is fairly standard practice for me anyway.

the slides are in coloured flexible poly tracks and the actual runners are adjustable inserts. Makes a very smooth free moving door.

Smoking hot details. Love the walnut drawer pulls.

Love this detail on the dove tails. Really beautifully crafted!
Screen Shot 2012-11-17 at 11.04.45 AM.png

Recent coffee table I designed:
Walnut / Clear glass

Maple / Smoked glass

The bolt in the center holds the piece together, and steel dowels act as spacers.

I designed it to be as minimal in parts and waste as possible. And it’s totally collapsible, even if you live in a small apartment like me. :smiley:

I still haven’t really figured out how to strengthen the joinery yet. I’ve only tested it to about 170lbs, and generally furniture of this type should hold 200lbs easily. I think a simple powder coated sheet metal bracket could complement the design, but I’m still working out the best way to strengthen it, without making the simple functional design more complicated.