Close

Re: doodling

Postby the meka don » June 6th, 2017, 12:12 pm


the meka don
step two
step two
 
Posts: 87
Joined: January 4th, 2010, 6:22 pm
Location: St. Petersburg
feeling sketchy
Attachments
gunsmoke.jpg

Re: doodling

Postby the meka don » June 6th, 2017, 12:13 pm


the meka don
step two
step two
 
Posts: 87
Joined: January 4th, 2010, 6:22 pm
Location: St. Petersburg
astro girl
Attachments
IMG_20151026_224603.jpg

Re: doodling

Postby KenoLeon » June 12th, 2017, 12:35 pm

User avatar

KenoLeon
full self-realization
full self-realization
 
Posts: 608
Joined: October 23rd, 2012, 12:22 pm
Location: Mexico City
A quasi asymmetrical racer for sketchwars !
Attachments
quasimetrical.jpg
quasimetrical.jpg (115.96 KiB) Viewed 4424 times
Eugenio (Keno) Leon
k3no.com Linkedin Instagram

"Go where you are celebrated, not merely tolerated"

Re: doodling

Postby rkuchinsky » June 12th, 2017, 3:33 pm

User avatar

rkuchinsky
Moderator
Moderator
 
Posts: 5657
Joined: July 3rd, 2005, 9:20 am
Location: Toronto, Canada
Getting in on the Weeklydesignchallenge sketch...

Commuter helmet for Rapha.

R
Attachments
DC_Rapha_helmet_sketch_01E1.png
Richard Kuchinsky / Directive Creator
http://www.rkuchinsky.com

The Directive Collective
http://www.directivecollective.com

Re: doodling

Postby yo » June 12th, 2017, 6:48 pm

User avatar

yo
Administration
Administration
 
Posts: 15667
Joined: January 5th, 2004, 6:57 pm
Location: SoCal
Nice, I'm digging the brim!

Re: doodling

Postby AndyMc » June 14th, 2017, 7:38 am

User avatar

AndyMc
step three
step three
 
Posts: 163
Joined: February 16th, 2013, 6:19 am
Location: Australia
Not really a doodle but I'm posting it anyway. Playing with some cork lamps. I had to do a bit of backyard modelmaking with a kitchen knife :lol:

IMG_0315.JPG


IMG_0321.JPG
Andy McIntyre
Folio | Instagram | | LinkedIn

Re: doodling

Postby moczys » June 14th, 2017, 11:53 am

User avatar

moczys
step one
step one
 
Posts: 23
Joined: January 19th, 2016, 1:11 pm
Location: Portland, OR
Is that cork sheet glued to core of polystyrene foam? If so, how did you get the top layer of cork glued on there? If there is a seam there... you can't see it. Looks great!

Re: doodling

Postby AndyMc » June 14th, 2017, 10:26 pm

User avatar

AndyMc
step three
step three
 
Posts: 163
Joined: February 16th, 2013, 6:19 am
Location: Australia
moczys wrote:Is that cork sheet glued to core of polystyrene foam? If so, how did you get the top layer of cork glued on there? If there is a seam there... you can't see it. Looks great!


Thanks :D

It is on a polystyrene cone, and the cork comes as an adhesive sheet, so I just wrapped it on and cut the cone to the size I wanted. The top and bottom are separate circles and I blended the joins at top and bottom with a sharp knife and sandpaper. The cork sheet tears super easily so I had to be careful not to accidentally rip chunks out of it.
Andy McIntyre
Folio | Instagram | | LinkedIn

Re: doodling

Postby KenoLeon » June 18th, 2017, 1:00 am

User avatar

KenoLeon
full self-realization
full self-realization
 
Posts: 608
Joined: October 23rd, 2012, 12:22 pm
Location: Mexico City
For sketchwars, and overhead perspective manga style with a cat that is up to no good : )
Attachments
DeskJockey.jpg
Eugenio (Keno) Leon
k3no.com Linkedin Instagram

"Go where you are celebrated, not merely tolerated"

Re: doodling

Postby yo » June 18th, 2017, 12:39 pm

User avatar

yo
Administration
Administration
 
Posts: 15667
Joined: January 5th, 2004, 6:57 pm
Location: SoCal
I dig it Keno!

Re: doodling

Postby the meka don » June 18th, 2017, 7:23 pm


the meka don
step two
step two
 
Posts: 87
Joined: January 4th, 2010, 6:22 pm
Location: St. Petersburg
push back
Attachments
inktober push.jpg

Re: doodling

Postby blaster701 » June 19th, 2017, 4:31 pm

User avatar

blaster701
full self-realization
full self-realization
 
Posts: 887
Joined: October 21st, 2004, 7:34 am
Location: Pompton Represent!
Lazy poster here I am...

Image

Image

Image

Re: doodling

Postby AndyMc » June 19th, 2017, 10:50 pm

User avatar

AndyMc
step three
step three
 
Posts: 163
Joined: February 16th, 2013, 6:19 am
Location: Australia
Im spending all day every day in Solidworks at my new employer, so I'm going to try to do a project a week to keep my sketching moving forwards, the first of which is a compact DSLR quality camera. Form explorations for overall aesthetic and gripping style.

IMG_0337.JPG
Andy McIntyre
Folio | Instagram | | LinkedIn

Re: doodling

Postby yo » June 19th, 2017, 10:58 pm

User avatar

yo
Administration
Administration
 
Posts: 15667
Joined: January 5th, 2004, 6:57 pm
Location: SoCal
I like seeing study pages like that Andy!

Re: doodling

Postby AndyMc » June 20th, 2017, 6:38 am

User avatar

AndyMc
step three
step three
 
Posts: 163
Joined: February 16th, 2013, 6:19 am
Location: Australia
yo wrote:I like seeing study pages like that Andy!


They're a lot of fun to sketch!

I'm definitely rusty with a pen so it's enjoyable to put something on paper again :D
Andy McIntyre
Folio | Instagram | | LinkedIn

Previous | Go to the Next Page

Return to sketching