Close

Softgoods Workflow

Postby Mitso » May 29th, 2014, 5:46 pm

User avatar

Mitso
step one
step one
 
Posts: 40
Joined: September 14th, 2013, 2:13 am
Hey guys,

I've been asked to design some softgoods and this area is new to me. For this project, I'm working from an office and communicating with our over-seas manufacturers to get prototypes made. I don't have access to a shop for prototyping in-house so i'm concerned this can become an issue. There are many variables with softgoods and I want to avoid the wait time for samples, lack of a materials library and communication issues diluting the design intent.

Any ideas on softgoods workflow......given the scenario? Also, This project will be in the tech bags category.

Re: Softgoods Workflow

Postby slippyfish » May 29th, 2014, 6:48 pm

User avatar

slippyfish
full self-realization
full self-realization
 
Posts: 1447
Joined: January 5th, 2004, 7:07 pm
Location: 48 degrees north
We just went through a softgoods (bag) project and none of us had much experience doing it. We found an independent softgoods prototyper (ex-Nike) that we worked intensively with, who helped turn our initial sketches into a real thing and is currently working on a tech pack for us to quote out.

I'd say finding a soft goods prototyper would be useful both in educating yourself and in making a successful bag. You can do paper prototypes yourself as well - this is what the soft goods prototyper will often do when figuring out patterns. Its also useful for gut checking your proportions and ideas.

Thats's about all I know but others on here will be much more knowledgeable.
“Traveling through hyperspace isn't like dusting crops, boy."

http://www.superformer.com
http://www.coroflot.com/skhid

Re: Softgoods Workflow

Postby yo » May 29th, 2014, 8:10 pm

User avatar

yo
Administration
Administration
 
Posts: 16238
Joined: January 5th, 2004, 6:57 pm
Location: SoCal
^ good advice.

A lot of it is experience based and if you can import that experience you can go faster and be better. Other than that, dissecting existing softwoods is a great way to learn more. Basically you are turning a 2D sheet good into a 3D object, so you can get far by studying other examples, making some quick dirty protos with fabric from JoAnnes and a hot glue gun (easier than stitching) and even paper mock ups.

Re: Softgoods Workflow

Postby slippyfish » May 30th, 2014, 10:36 am

User avatar

slippyfish
full self-realization
full self-realization
 
Posts: 1447
Joined: January 5th, 2004, 7:07 pm
Location: 48 degrees north
(Safari autocorrects 'softgoods' to 'softwoods' FYI)
“Traveling through hyperspace isn't like dusting crops, boy."

http://www.superformer.com
http://www.coroflot.com/skhid

Re: Softgoods Workflow

Postby yo » May 30th, 2014, 10:54 am

User avatar

yo
Administration
Administration
 
Posts: 16238
Joined: January 5th, 2004, 6:57 pm
Location: SoCal
Ha!

Re: Softgoods Workflow

Postby orrkwankit » May 30th, 2014, 11:48 am

User avatar

orrkwankit
step two
step two
 
Posts: 76
Joined: January 10th, 2012, 12:57 pm
Location: San Diego
Close to 40% of my work is softgoods. The process that I find works best for me is to do quick napkin sketches (enough for yourself to go by) and go to JoAnne fabric like YO said and fashion something up. Knowing how to sew is a big plus but you can use needles to stitch things together temporarily. You design it by wearing it (and on other body types) and less about how it looks/materials at this point.

Re: Softgoods Workflow

Postby Kershaw » May 31st, 2014, 10:45 am

User avatar

Kershaw
step four
step four
 
Posts: 557
Joined: December 2nd, 2007, 6:14 pm
Location: Vermont
Depending on how in depth your Tech pack needs to be I would suggest going out and buying a couple cheap samples. Take these samples and deconstruct them along their seams so you can better understand the overall patterns and seams.

Also when working on softgoods be sure to have images/views/2D drawings for all of the sides as well as dimensions for the important stuff.

The samples will also help you understand materials as well as going to a fabric shop... just remember the higher the Denier the "rougher" the texture and denser the fibers. With that said, 600D poly is not as strong as 600D Nylon...etc so keep in mind not all fabrics are equal.

A great resource to order a plethora of cheap samples is Seattlefabrics.com

Re: Softgoods Workflow

Postby Mitso » June 2nd, 2014, 2:18 pm

User avatar

Mitso
step one
step one
 
Posts: 40
Joined: September 14th, 2013, 2:13 am
Thanks for the advice and resources. I'll have to see if we can work with a local prototyper; having someone more knowledgeable to work with will get me familiar with the methods and terminology. Until then I think I'll jump into the reverse engineering and paper mockups. Much appreciated!

Re: Softgoods Workflow

Postby sewsassy19 » September 5th, 2014, 5:28 pm


sewsassy19
 
Posts: 4
Joined: October 26th, 2011, 7:11 pm
Hi there. I do soft goods prototypes. Please feel free to contact me for more info. langell119@gmail.com

Gratefully,
Lauren

Re: Softgoods Workflow

Postby sewsassy19 » September 10th, 2014, 6:02 am


sewsassy19
 
Posts: 4
Joined: October 26th, 2011, 7:11 pm
Just an FYI....I gave the wrong email address for prototype work. I am only doing prototype work through Priority Designs. I can be reached at langell@prioritydesigns where our capabilities are endless. Please check out our site at prioritydesigns.com to get an idea of the kind of work we can provide. We've got a great team and can handle just about anything. For NON-prototype work I can be contacted at langell119@gmail.

Gratefully,
Lauren

Re: Softgoods Workflow

Postby RonTheis » March 6th, 2015, 4:32 pm


RonTheis
 
Posts: 3
Joined: March 6th, 2015, 4:26 pm
Mitso wrote:Hey guys,

I've been asked to design some softgoods and this area is new to me. For this project, I'm working from an office and communicating with our over-seas manufacturers to get prototypes made. I don't have access to a shop for prototyping in-house so i'm concerned this can become an issue. There are many variables with softgoods and I want to avoid the wait time for samples, lack of a materials library and communication issues diluting the design intent.

Any ideas on softgoods workflow......given the scenario? Also, This project will be in the tech bags category.



Please contact me. My website is www.pharaohdesignstudio.com
Would love to work with you to provide high quality prototypes. I'm in Wisconsin and have over 30 years of hands on experience.

Thanks,
Ron


Return to footwear & softgoods