Close

Engagement Ring Design

Postby rkuchinsky » September 5th, 2017, 11:42 am

User avatar

rkuchinsky
Moderator
Moderator
 
Posts: 5764
Joined: July 3rd, 2005, 9:20 am
Location: Toronto, Canada
I just finished what might have be the most important design project I ever worked on.... After all, I will be looking at this for the rest of my life!

Over the last 5 months I worked very closely with a local Jewelry Designer and Diamond Expert to design the perfect ring for my fiancée.

I was lucky enough from the start that I know she trusted me 100% with the design, so had totally free range. She doesn't wear a lot of jewelry, but the few pieces I have bought her in the past for special occasions from local designers have all been a hit and tended towards my own personal aesthetic of something more minimal and modern vs. traditional and overly fussy.

My goal was to design something very original, yet timeless and classic, subtle enough to wear daily and for the running we both do, but also something that works at a formal occasion.

For inspiration, I looked at everything from modern minimal design objects like the Apple Watch, to Marc Newson keychains, Danish 70's Brutalist jewlery, to Art Deco architecture, and MCM furniture.

The design process went very smooth. While working in parallel with the Diamond Expert to source the diamond I was looking for (modified Radiant Cut Corner Yellow), I went from sketch to rough prototype working with the Jewelry Designer and learning about the process of ring casting, setting, etc. I made prototypes from wire and crazy glued on rhinestones from the dollar store and cut up pieces of eraser. I made at least 50 mockups befor setting on the final design.

Once the design was closer to final, I did 2D CAD drawings with dimensions and sections in Illustrator, and the Jewelry Designer recreated the 3D geometry in CAD. CAD models were evaluated and revised, and 3D prints were made. The 3D print is then used in a lost wax casting process to cast the Platinum, and then cleaned up, polished and finished by hand. The Diamond is then hand set, and ring finished with laser welding additional platinum and micro engraving to finish and make the diamond appear set without any visible hardware.

Overall, and amazing process and she's super happy with the ring. I'll design our wedding bands together and hope to start a tradition of designing jewelry for her for special occasions in out life together.

R

PS. She said Yes!

PPS. More process pics to come. I took a lot throughout the process of various models, sketches, mockups.... Still going through them all. Hope to get them all together and get a hardcover photobook to give her an upcoming occasion.
Attachments
1.jpg
4.jpg
5.jpg
IMG_9225.JPG
1 (2).jpg
The Directive Collective
http://www.directivecollective.com

Re: Engagement Ring Design

Postby FH13 » September 5th, 2017, 12:24 pm


FH13
step four
step four
 
Posts: 295
Joined: February 27th, 2008, 5:00 pm
Location: Huntington Beach, CA
Congratulations.
Wasn't feeling the first couple of pictures but it looks awesome on her finger. I think you captured the minimalism and distinctive look you were going for.
May I recommend matching earrings perhaps....
Great job.

Re: Engagement Ring Design

Postby yo » September 5th, 2017, 12:29 pm

User avatar

yo
Administration
Administration
 
Posts: 16033
Joined: January 5th, 2004, 6:57 pm
Location: SoCal
First of all congratulations!

The design is fantastic. Really simple and elegant but very unique and designedly at the same time. Nice balance.

One piece of advice from another designer that designed his wife's ring, have a good photographer document it with a macro lens. I didn't do that and 17 years later it is a bit scratched up. I need to have it polished and photographed.

Re: Engagement Ring Design

Postby rkuchinsky » September 5th, 2017, 12:38 pm

User avatar

rkuchinsky
Moderator
Moderator
 
Posts: 5764
Joined: July 3rd, 2005, 9:20 am
Location: Toronto, Canada
yo wrote:First of all congratulations!

The design is fantastic. Really simple and elegant but very unique and designedly at the same time. Nice balance.

One piece of advice from another designer that designed his wife's ring, have a good photographer document it with a macro lens. I didn't do that and 17 years later it is a bit scratched up. I need to have it polished and photographed.


Thanks! Good advice. I have done a whole bunch of pics with the iPhone which has a pretty great macro, but I do plan on getting some proper studio pics done. The design for sure is hard to kinda capture in photos as it's really different from different angles. The front view shows the edge of the diamond and is pretty unique.

R
The Directive Collective
http://www.directivecollective.com

Re: Engagement Ring Design

Postby rkuchinsky » September 5th, 2017, 12:45 pm

User avatar

rkuchinsky
Moderator
Moderator
 
Posts: 5764
Joined: July 3rd, 2005, 9:20 am
Location: Toronto, Canada


R
The Directive Collective
http://www.directivecollective.com

Re: Engagement Ring Design

Postby iab » September 5th, 2017, 2:57 pm


iab
full self-realization
full self-realization
 
Posts: 2448
Joined: January 5th, 2004, 6:03 pm
Nice! I did the same thing 20+ years ago. Serge was a Brazilian jeweler in jewelry row on Wabash. Sold us the diamond, made my design. I used him again for our 1 year anniversary, but haven't seen him since. Still have his card. Serge was great.

Any concern with catching and bending the setting and having the stone pop out?

Re: Engagement Ring Design

Postby rkuchinsky » September 5th, 2017, 3:09 pm

User avatar

rkuchinsky
Moderator
Moderator
 
Posts: 5764
Joined: July 3rd, 2005, 9:20 am
Location: Toronto, Canada
I figured I would not be the only designer to have done this :)

The setting and ring is one piece cast Platinum. Stone is set with a recess on 2 sides and then additional material laser welded and micro hammered on top. No way the stone is going anyplace. At least that is what the old german Master Goldsmith guy says ;)

I think your finger would break before the ring would.

I had some initial concerns of the ring getting caught, but it's no more likely than on a traditional setting. I had an alternate design that addressed this a bit more, and had 2 sides open to show the diamond edge, but it lost a lot of the simplicity and minimalism.

R
Attachments
IMG_8336.JPG
IMG_8359.JPG
IMG_8357.JPG
The Directive Collective
http://www.directivecollective.com

Re: Engagement Ring Design

Postby mo-i » September 6th, 2017, 7:37 am

User avatar

mo-i
full self-realization
full self-realization
 
Posts: 1253
Joined: November 30th, 2004, 5:46 am
Location: Germany
You guys just have upped the ante!

Coincidentally I have set a date with a local goldsmith for a first informal discussion within the next 2 weeks.
I am not young enough to know everything.
Oscar Wilde

Re: Engagement Ring Design

Postby iab » September 6th, 2017, 7:47 am


iab
full self-realization
full self-realization
 
Posts: 2448
Joined: January 5th, 2004, 6:03 pm
rkuchinsky wrote: At least that is what the old german Master Goldsmith guy says ;)


Why is it these jewelers are such cool characters?

I recall having a flaw in my initial design that Serge pointed out and we corrected so the diamond wouldn't pop out, but for the life of me, I can't remember. My spouse still tells me she gets compliments on the setting.

And I forgot, Congratulations! Mazel Tov!


Return to projects